Most of our products support the UDP protocol. In order to test UDP communication with one of our product in the local server, we will need to play with port forwarding settings in our router. We can use the UDP protocol over both local and remote server. Local server refers to your own machine while the remote server is another machine/computer.
This Tutorial is maintained in our documentation section.
Please submit your technical issues and feedback to the community forum.
Each of these shields can be connected to the Internet via PPP(Point to Point Protocol). For this tutorial, we have written a script to install and perform the required steps.
Without further ado let us jump into the installation process:
1. Get the script by the following command
2. Now change the permission of the downloaded script. chmod +x install.sh
3. Now install the script sudo ./install.sh It will ask several questions, just answer them accordingly to complete the installation process. The questions are:
- Please choose your Sixfab Shields/HATs
You will be offered to choose among the mentioned three shields. Then it will fetch required scripts for you.
- Do you have updated kernel
It asks if your kernel is up-to-date. If no[N] it updates the kernel else it skips the update. Then it installs ppp.
- What is your carrier APN?
Here, it asks for your carrier’s APN. For me it is hologram.
- Enter your PORT name
In this step you will enter your PORT. For 3G, 4G/LTE Base Shield && Base HAT it will be ttyUSB3.
- Do you want to activate auto-connect/reconnect service at R.Pi boot up?
This option allows you to connect to the Internet via your shield automatically when your Raspberry Pi Starts. If you want to connect to the Internet automatically type y else N. If you have selected N then you will need to run sudo pon to connect to the internet and sudo poff to stop it. Make sure your module is powered up(Not applicable for Base Shield).
Enjoy your Internet connection.
Route: One of the possible errors you may get is the routing error. In this case, run the following commands
sudo route del default
sudo route add default ppp0
If your carrier asks for username and password;
Remove noauth from /etc/ppp/peers/provider and add following lines
user “YOUR USERNAME”
Sixfab is launching their new shield for Raspberry Pi named as Sixfab Raspberry Pi Cellular IoT Application Shield. The Shield uses Quectel BG96 module which gives this shield combined feature of LTE technologies Cat.M1, Cat.NB1 and eGPRS for your Raspberry Pi. Read More