Home Page › Forums › Raspberry Pi Shields › Access GPS without GSM on Raspberry Pi IoT Cellular Shield
This topic contains 5 replies, has 2 voices, and was last updated by Saeed 11 months, 1 week ago.
I was looking to see if anyone has insight into how I can use the onboard GPS on the IoT Cellular Shield without a SIM card.
Thanks so much!
Yes, you can use the GPS of the Shield without a SIM card.
You may check the available functions related to GPS in the Raspberry Pi Cellular IoT Application Shield Library
Thank you for your reply, when I run any of the GPS functions it just constantly outputs the command to the serial port and I never get a response back.
Below is some sample code:
from cellulariot import cellulariot
node = cellulariot.CellularIoT()
The sensor_test.py works just fine
Use the following lines to access data.
Make sure you are testing it outdoor.
I ended up needing to get a new pi the serial on the one i was using was not working. Thank you for your help!
Thank you for your feedback.
You must be logged in to reply to this topic.