Home Page Forums Tinylab ESP8266

This topic contains 0 replies, has 1 voice, and was last updated by  gernot.abel 1 year, 10 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #184

    coopercarter
    Member

    According to the campaign material, the IoT Kit was supposed to include a NRF24L01P , a HC06, and a ESP8266. My package did not contain a ESP8266. How can I get the ESP8266?

    #185

    coopercarter
    Member

    Never mind. I found the 8266; it had fallen out while unpacking all the materials. Sorry.

    #188

    gernot.abel
    Member

    when trying to upload the Mqtt example I will get the following erro

    error: failed sending 36 bytes
    error: failed sending 0xC0
    error: failed sending 0xC0
    error: failed sending 8 bytes
    error: failed sending 36 bytes
    error: failed sending 0xC0
    error: failed sending 0xC0
    error: failed sending 8 bytes
    error: failed sending 36 bytes
    error: failed sending 0xC0
    error: failed sending 0xC0
    error: failed sending 8 bytes
    error: failed sending 36 bytes
    error: failed sending 0xC0
    error: failed sending 0xC0
    error: failed sending 8 bytes
    error: failed sending 36 bytes
    error: failed sending 0xC0
    error: failed sending 0xC0
    error: failed sending 8 bytes
    error: failed sending 36 bytes
    error: failed sending 0xC0
    error: failed sending 0xC0
    error: failed sending 8 bytes
    error: failed sending 36 bytes
    error: failed sending 0xC0
    error: failed sending 0xC0
    error: failed sending 8 bytes
    error: failed sending 36 bytes
    error: failed sending 0xC0
    error: failed sending 0xC0
    error: failed sending 8 bytes
    error: failed sending 36 bytes
    error: failed sending 0xC0
    warning: espcomm_sync failed
    error: espcomm_open failed
    error: espcomm_upload_mem failed
    error: espcomm_upload_mem failed

     

    does it work for You?

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.