Home Page Forums Raspberry Pi Shields initialize the Shield and start the ppp connection

This topic contains 4 replies, has 2 voices, and was last updated by  Saeed 2 months, 3 weeks ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #36206

    lele.donald
    Participant

    hello,
    I am able to connect the shield ( Raspberry Pi 3G-4G/LTE Base V2) but i need the shield to
    automatically ppp connect on startup and also retry to connect in case the connection is lost or interrupted.

    could you help please ?
    thank

    • This topic was modified 2 months, 4 weeks ago by  lele.donald.
    • This topic was modified 2 months, 4 weeks ago by  lele.donald.
    #36222

    Saeed
    Moderator

    Hello,

    Please follow the PPP installer tutorial. It contains auto reconnect service.

    #36233

    lele.donald
    Participant

    I have follow this tutorial but i still need to type manually “sudo pon” or” sudo pppd call gprs” to get the connection.

    #36234

    lele.donald
    Participant

    i got this message after “ifconfig ppp0″ : ppp0: erreur lors de la recherche d’infos sur l’interface: Périphérique non trouvé (sorry it is in french that mean ” not device found). but if i type “sudo pppd call gprs” before it works

    #36268

    Saeed
    Moderator

    Please re-install and check again.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.