Home Page Forums Raspberry Pi Shields No IP address with UART (but no problem with USB)

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #66478
    alessandro.blaco
    Participant

    Hi,
    I configured successfully my raspberry pi 3 running buster with base shield v2 and 3G/4G module. It connects successfully using USB, but using UART I got this output on “sudo pon”:

    In order to use UART I:

    • soldered the UART resistor pads
    • enabled serial interface through raspi-config
    • disabled serial login shell through raspi-config

    Can anybody help me?

    Thank you,
    Alessandro

    #66936
    ensar
    Moderator

    Hello,

    Can you take a photo of your solder?

    #66941
    alessandro.blaco
    Participant

    Sure,
    here you are:
    soldered pads

    Thank you,
    Alessandro

    #67069
    ensar
    Moderator

    Seem you are using a roaming SIM. Does it happen with native sim?

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.