Home Page Forums Raspberry Pi Shields Raspberry Pi 3G-4G/LTE Base Shield V2

This topic contains 1 reply, has 2 voices, and was last updated by  ensar 3 weeks, 4 days ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #55044

    Monroe Austin
    Participant

    Hardware used:
    Raspberry Pi 3G-4G/LTE Base Shield V2
    Quectel EC25 Mini PCle 4G/LTE Module – EC25-A
    LTE Main & Diversity & GNSS Triple Port u.FL Antenna
    Raspberry Pi B+
    Operating System Raspbian Buster

    I ran the PPP installer for Sixfab 3G, 4G/LTE shield tutorial first then started the Using Sixfab 3G or 4G Raspberry Pi shield as a Wi-Fi Hotspot tutorial.
    when i got to step 5 i am receiving an error when trying to setup the static IP. Below is the terminal showing error code.

    Using username “pi”.
    [email protected]‘s password:
    Linux raspberrypi 4.19.75-v7+ #1270 SMP Tue Sep 24 18:45:11 BST 2019 armv7l

    The programs included with the Debian GNU/Linux system are free software;
    the exact distribution terms for each program are described in the
    individual files in /usr/share/doc/*/copyright.

    Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
    permitted by applicable law.
    Last login: Thu Oct 10 19:48:04 2019

    SSH is enabled and the default password for the ‘pi’ user has not been changed.
    This is a security risk – please login as the ‘pi’ user and type ‘passwd’ to set a new password.

    [email protected]:~ $ sudo apt-get install dnsmasq hostapd
    Reading package lists… Done
    Building dependency tree
    Reading state information… Done
    The following additional packages will be installed:
    dns-root-data dnsmasq-base
    The following NEW packages will be installed:
    dns-root-data dnsmasq dnsmasq-base hostapd
    0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded.
    Need to get 1,050 kB of archives.
    After this operation, 2,666 kB of additional disk space will be used.
    Do you want to continue? [Y/n] y
    Abort.

    [email protected]:~ $ sudo nano /etc/dhcpcd.conf
    [email protected]:~ $ sudo nano /etc/network/interfaces
    [email protected]:~ $ sudo service dhcpcd restart
    Job for dhcpcd.service failed because the control process exited with error code.
    See “systemctl status dhcpcd.service” and “journalctl -xe” for details.

    Here’s a look at the /etc/network/interfaces file:

    GNU nano 3.2 /etc/network/interfaces Modified

    # interfaces(5) file used by ifup(8) and ifdown(8)

    # Please note that this file is written to be used with dhcpcd
    # For static IP, consult /etc/dhcpcd.conf and ‘man dhcpcd.conf’

    # Include files from /etc/network/interfaces.d:

    allow-hotplug wlan0
    iface wlan0 inet static
    address 172.24.1.1
    netmask 255.255.255.0
    network 172.24.1.0
    broadcast 172.24.1.255
    #wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

    What is causing this error? Thanks in advance.

    • This topic was modified 1 month, 1 week ago by  Monroe Austin.
    #58382

    ensar
    Moderator

    Hi.

    Yes, sometimes there are problems. New tutorial will be released soon. It will be faster and easier.

    Have a nice day.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.