Home Page Forums Raspberry Pi Shields Raspberry Pi GSM/GPRS Shield status led not working

This topic contains 3 replies, has 2 voices, and was last updated by  Saeed 2 months, 3 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #37071

    Ari
    Participant

    Hi,

    I received a couple of week ago the GSM/GPRS shield. I have set it up on to Rapsberry Pi 3B+ and it is working ok.

    I have a script that turns it on and connects to internet. This is working perfectly.

    BUT the blue status led does not blink at all. The previous shields starts blinking when the shield get connected, but not this one.

    How can I check that status led is not broken or something? Is there some setting that turns it of?

    Best Regards

    AriA

    #37200

    Saeed
    Moderator

    Hi,

    Could you please check if it is soldered well?

    #38170

    Ari
    Participant

    Hello,

    I got the shield finally back to the lab.

    I checked the LED and it was soldered well. So something else is wrong. What else could be done/tested?

    Best Regards
    AriA

    #38188

    Saeed
    Moderator

    Could you please send a clean image of the shield?

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.