Home Page › Forums › Raspberry Pi Shields › wwan0 is dropped
This topic contains 1 reply, has 2 voices, and was last updated by Saeed 2 months ago.
I have experienced Raspberry Pi board dropping the wwan0 after around 30 minutes of run time. My setup includes a cMOS camera connected to the USB port and the system is running motion. It is sending snapshot images every 5 seconds.
Have you experienced this? I appreciate any help.
Dropping network is a normal case in cellular connection,
You will need to set control which will check the availability of connection.
reconnect service may help.
You must be logged in to reply to this topic.