Raspberry Pi IP65 Weatherproof IoT Project Enclosure


Deploy your outdoor Raspberry Pi project without concerning rain, snow, dust in this IP65 plastic case with clear top. This weatherproof enclosure has three IP67 SMA to u.FL(IPEX) cable connector for connectivity and a waterproof IP68 micro USB cable-end socket if you want to power your project with modified original Raspberry Pi power supply.

118 in stock

SKU: S104 Category: Tags: , ,


The Raspberry Pi Weatherproof IP65 Outdoor Case from Sixfab is the perfect waterproof enclosure to take your Raspberry Pi and electronics outdoors. This enclosure will protect your Raspberry Pi, Beaglebone, Tinker Board and HATs from rain, snow, wind and a little amount of dragon fire. You can mount it on a wall, pole or wherever you want. Fasteners, spacers, fixing plugs, standoffs, heavy-duty zip-ties, and other necessary things are included to easily deploy it somewhere indoor or outdoor.

This rugged box has enough space for adding batteries, sensors, camera or other electronics nearby Raspberry Pi. You can plug the IP65 cable socket modified official Raspberry Pi power adapter. The end of this weatherproof socket is micro USB, so you can power your project without messing with the immersion of water or ingress of dust.

The case made from plastic(ABS) and it is RF friendly. You can stick the antennas inner the enclosure or use three built-in waterproof u.FL(IPEX) to SMA connectors to place bigger antennas outside of the case. Two SMA jacks placed opposite sides of the case to provide better Rx-diversity.


  • This enclosure is not assembled!
  • The Raspberry Pi is not included!


  • Dustproof&Waterproof&Weatherproof case and cable connector – IP6x certified
  • Transparent clear top cover with silicone gasket seal
  • Base plate supports mounting any Raspberry Pi models
  • Necessary standoffs, screws, fittings, nuts included
  • Mounting ears help hang the enclosure on walls or poles easily
  • Dimension: 212x123x60mm
  • Material: ABS

Package Includes

  • 1 x IP67 case with clear acrylic top cover
  • 1 x Original Raspberry Pi 5.1V-2.5A power supply with modified IP68 socket and Interchangeable Plug Types for the EU, US, UK, and Australia
  • 1 x Acrylic PCB base plate for the mounting interface between boards and case bottom
  • 3 x IP65 certified three SMA to u.FL(IPEX) waterproof antenna connector
  • 1 x IP68 socket with micro USB end to power Raspberry Pi
  • 4 x M5x30mm Stainless Steel Screw with plastic wall fixing plugs
  • 6 x M3x7mm Stainless Steel Screw for fixing the base plate to the case bottom
  • 4 x M3x3mm Plastic Standoff for fixing Raspberry Pi to the base plate
  • 4 x M2.5x10mm Stainless Steel Screw for fixing Raspberry Pi to the base plate
  • 4 x M2.5x6mm Stainless Steel Screw for board stacking
  • 2 x M2.5x11mm Brass Standoff for board stacking
  • 2 x M2.5x14mm Brass Standoff for board stacking
  • 4 x M2.5 Stainless Steel Washer
  • 2 x M2.5 Stainless Steel Nut
  • 8 x 400mm Heavy-duty zip-tie





There are no reviews yet.

Be the first to review “Raspberry Pi IP65 Weatherproof IoT Project Enclosure”

Your email address will not be published. Required fields are marked *

Questions and answers of the customers

  1. 0 votes
    Q Can we fit an ethernet cable through the case? answer now
    Asked by Daniel on 16 September 2019 12:28 PM

    We do not have space for it. You can modify it by yourself.

  2. 0 votes
    Q Does this contain the antenna wires? answer now
    Asked by Jawad Jaber on 13 September 2019 4:18 AM

    Yes, it contains SMA to uFl convertors.

  3. 0 votes

    The antenna holes are pre drilled.

  4. 0 votes
    Q Are you going to make a Raspberry Pi 4 compatible version? answer now
    Asked by Christian Hörlle on 6 September 2019 5:29 PM
    A We're not doing it now.
    You can use micro USB to USB type C convertor to power the RPi 4.
  5. 0 votes
    Q do you provide 3D models like STEP or STL? answer now
    Asked by Tom White on 2 September 2019 5:17 PM
  6. 0 votes
    A We supply micro USB to power the RPi, You can use micro USB to USB type C convertor to power the RPi 4. The case hase clear acrylic top cover, You can mount the camera inside the enclosure.
  7. 0 votes
    A We dont.
  8. 0 votes
    Q Do you have a case for an ardunio? answer now
    Asked by Gavin Bathgate on 2 August 2019 4:03 AM
    Answered by the admin

    No, we don't. You can use this case for Arduino too if it is not too large for you.

Send me a notification for each new answer.