Quickstart

Raspberry Pi Gprs  Shield

  1. Solder the 2×20 pin header to shield.
  2. Plug it on Raspberry Pi
  3. Select “Pi” on Usb-Pi switch.
  4. Press Power Up button 2 seconds!
  5. Use this tutorial : Make a PPP internet connection with Sixfab GPRS Shield

Raspberry Pi Gps Shield

  1. Solder the 2×20 pin header to shield.
  2. Plug it on Raspberry Pi
  3. Select “Pi” on Usb-Pi switch.
  4. Use this tutorial : Raspberry Pi Gps Tracker with Sixfab Gps Shield

Raspberry Pi Xbee Shield

  1. Solder the 2×20 pin header to shield.
  2. Plug Xbee module on shield
  3. Plug module on Raspberry Pi
  4. Select “Pi” on Usb-Pi switch.
  5. Use this tutorial : Raspberry Pi Ds18b20 Temperature Sensor logger with Sixfab Xbee Shield

Raspberry Pi 3G/4G Shield

  1. Solder the 2×20 pin header to shield.
  2. Plug module on Raspberry Pi
  3. Connect module via usb to Raspberry Pi or Select “On” on Uart Switch
    • If you connect via Uart , internet speed very slow because of uart speed.
  4. Use this tutorial :Raspberry Pi Kernel update for Sixfab 3G/LTE shield’s usb drivers
    1. For Windows Driver
      3G : https://raw.githubusercontent.com/sixfab/rpiShields/master/driver/Quectel_USB_Drivers_For_UC20%26UC15%26EC20_V1.1.zip
      4G : https://raw.githubusercontent.com/sixfab/rpiShields/master/driver/Quectel_Windows_USB_Drivers_for_EC21%26EC25_V1.0.zip

Tutorials :