DUE TO SOME UNSTABILITY, THE TUTORIAL WILL BE REVISED IN A SHORT TIME….STAY TUNED
##Note: This has been tested with Raspberry Pi 4 too.
In this tutorial, we will be demonstrating you the process step by step. Without further ado, let’s get started.
In this tutorial we will learn how to get GPS data using 3G, 4G/LTE shield.
GPS(Global Positioning System) also known as NavStar indicates the position of an individual on the earth. The Satellites orbiting around the earth sends precise details of their positions at a regular interval of time. Once information are received by a GPS receiver, a GPS receiver can pinpoint the location.
There are also navigation systems which support in their in specific regions like GLONASS provided in Russia.
For this tutorial we will need
a. Raspberry Pi
b. 3G, 4G/LTE Shield
c. 3G, 4G/LTE module (for 3G UC20 and for 4G EC25 is used)
d. PCB Mobile Antenna (2x)
e. GPS Antenna
Here it goes
#Note: The new PPP installer Tutorial is Available now. LINK to the tutorial
Previously we have used GPRS shield to establish internet connection. Now we will use 3G, 4G/LTE shield for PPP internet connection. In order to make a 3G and 4G connection we will need to use Quectel UC20 and Quectel EC25 modules respectively.
As this tutorial is for 3G-4G/LTE PPP Internet connection, we will use Quectel UC20 3G module or Quectel EC25 4G/LTE module, which are series of powerful function UMTS/HSPA+ module and series of LTE category 4 module optimized specially for M2M, IoT and multimedia applications respectively. Due to rich set of protocols, industry-standard interfaces and abundant functionalities extend the applicability of the module ti a wide range of M2M and IoT applications such as industrial router, industrial PDA, rugged tablet PC, video surveillance and digital signage.