Telit ME910C1-WW Mini PCle LTE-M & NB-IoT Module

$64.90

This product only includes the Telit Mini PCle LTE Module. In order to use this with a Raspberry Pi, you need to use a Base HAT, LTE antenna .

55 in stock

Sixfab Connect SIM

Sixfab Connect SIM is a cellular connectivity solution for connecting your IoT devices with the best global networks. You can activate and use your SIM card in a few minutes, without any contract or commitment.

SKU: S135 Category: Tags: ,

Description

The ME910C1 is the Category M1/NB1 evolution of the Telit LE910 Series of LTE modules. Specified in the approved Release 13 of the 3GPP standard, Cat M1/NB1 devices are specifically tailored for IoT applications, offering optimized power consumption and enhanced coverage.

The ME910C1 is an LTE UE Category M1/NB1 device with maximum downlink and uplink data rate in the range of 300kbps. This next generation of products supports the new features specified by 3GPP to boost IoT applications based on Raspberry Pi, such as the Power Saving Mode (PSM) and the extended Discontinuous Reception (eDRX), which allow the devices to wake up periodically to deliver only very small amounts of data to the network and then go back to sleep for most of the time, thus allowing longer battery operation. Enhanced coverage, with up to +15dB/+20dB in maximum coupling loss (MCL) compared to the other cellular technologies, is also one of the key benefits of this new LTE flavour. LTE Cat M1/NB1 devices are therefore optimized in cost, size and power consumption compared to higher UE categories. With worldwide coverage advantage, it makes the ME910C1 the perfect platform to enable a quick implementation of LTE technology in IoT/M2M where low cost and low power are more relevant than high speed.

You can easily insert a Mini PCIe module in Base HAT then start using cellular internet with your Raspberry Pi. Only USB communication is available.

Ask a Question

Features:

  • Worldwide Coverage
  • LTE UE Category M1/NB1 3GPP release 13 compliant
  • 2G fallback support
  • Embedded GNSS (GPS, GLONASS, Beidou, Galileo)
  • Single Rx, single LTE antenna
  • 3GPP Rel. 12 Power Saving Mode (PSM)
    3GPP Rel. 13 Extended Discontinuous Reception (eDRX)
    3GPP Rel. 13 Extended coverage
  • Data Speeds:
    • LTE Category M1
      Uplink up to 375 kbps
      Downlink up to 300 kbps
    • LTE Category NB1
      Uplink up to 62.5 kbps
      Downlink up to 21 kbps
    • EGPRS
      Uplink up to 236 kbps
      Downlink up to 296 kbps
  • SMS
  • IPv4/IPv6 stack with TCP and UDP protocol
  • OMA Lightweight M2M (LWM2M)
  • Regulatory: PTCRB, GCF, RED, FCC/IC, RCM, Jate, Telec, CCC
  • Certification: AT&T, Verizon, NTT DoCoMo, Deutsche Telekom, Anatel, Telstra, Ifetel, Rogers, Telus, US Cellular
  • REACH and RoHS compliant
  • Temperature Range: -40 °C to +85 °C
  • Dimensions: 51 x 30 x 3.2 mm

Key Applications

  1. Video/Music Streaming
  2. Large Data Downloads and Uploads
  3. LTE Dongle/Router
  4. Mobile Internet Hotspot
  5. High-speed GPS Tracking
  6. Real-time Environmental Monitoring
  7. Smart City & Agriculture Applications
  8. Smart Parking
  9. Security & Asset tracking

Antenna Recommendations

LTE: Sixfab LTE Antennas

Antenna Interfaces

Telit ME910C1-WW Mini PCle LTE-M & NB-IoT Module Antenna Interfaces

Package Includes

  • 1x Telit Mini PCIe CAT M1&NB1 Global Module

Documents:

Driver:

 

Reviews

There are no reviews yet.

Be the first to review “Telit ME910C1-WW Mini PCle LTE-M & NB-IoT Module”

Your email address will not be published. Required fields are marked *

You may also like…